Daily Wire Tip: Wrapping Slippery Cabochons
Daily Wire Jewelry Making Tip
Question:
I’m rather new to working with wire, but I have also surprised myself with some of the things I’ve made. One thing I have trouble with is when I’m wrapping stones; they are very slippery and hard to hold on to. I’ve also noticed that there have been a few scratches on the stone because of this. Can you help?
-Renee in Maple Heights, Ohio
Answer:
Congratulations, Renee, it sounds like you are having a good time with your latest venture.
Believe it or not, the easiest way I know to hold slippery stones is to cut the sticky ends off a fabric band-aid. Stick these to each side of the cab, and you will be able to hold it more easily.
To remove the sticky residue when you are finished, simply use a bit of acetone or denatured alcohol.
Answer contributed by Dale “Cougar” Armstrong
Have a Question? Click Here to Submit Your Question
Click to Receive Daily Tips by Email
band aid, cab, cabochon, technique, tip
Filed under:Daily Wire Jewelry Tips‚ Project Help‚ Technique Tips
Like this post? Subscribe to my RSS feed and get loads more!
Blog
Twitter
Facebook
Great questions deserve great anwsers like this one! I was under the impression the only way to defeat slippery cab was with stronger and more nimble fingers added to experience!!! Great to have this tip!
great tip Cougar, I never thought of that.
Renee,
I use painters tape. It doesn’t always leave much residue and many times none at all.
In fact when I’m doing a lot of spirals, I wrap my index and thumb fingers with painters tape so it doesn’t hurt afterwards. This allows me to hold onto them easier and even provide more control.
Nice Catherine – thanks!
I love this idea Catherine! I am a die-hard wire wrapper and my fingertips often pay a painful price. Thank you for this great idea – can’t wait to try it!
I work on a surface that reduces “skidding” of the metal wrap–bought a thin foam rectangle from Michael’s for this purpose. Also, when I’m doing the back of the wrap on a rounded cab I frequently place the cab/wire combo on a thicker piece of foam or a towel that has been folded over several times to form a cushion for the face of the stone.
Hi Gayle, I like a cushion style mouse pad for a work surface.
masking tape works well too
I recently purchased a ring tutorial that listed “Packing Shipping Putty” to be used as a temporary adhesive for the gemstone. She says to remove the putty before final adjustments. I have to be honest and say that I have not tried this method yet, but I will be very soon as I feel that it would prevent the gem from moving more than any other option I have tried so far. The lady listed Office Depot as a provider for this shipping putty.
Celine B.
Toronto, Ontario, Canada
This is a great idea! But I would caution as to what type of stone it is before using the acetone on it. I have seen some damage to certain porous stones with this.
In addition to tape, I love my parallel action pliers that give an even grip across the entire bundle of wires.
I don’t know if this would work or not but what about wrapping one or more of your fingers with a small strip of blue painters tape with the sticky side out. It will hold the cab and not leave a residue.
I have used carpet tape. Stick it down on your work table or work pad. Pull off the backing and lay your cab face up. I rarely have any residue on the stone when I am finished. I position the cab above my ruler which I have also stuck to my work surface so I can design and mark on my bundle.
I attended a wire-wrapping workshop where the instructor advocated using a rubber band. I did that during the workshop, and it worked fairly well. Once the wrap is in place at the bottom, slide the rubber band around to hold the frame against the sides while you wrap the top portion. It’s easy to reposition the band as needed.
Some people suggest rubber-tipped spring clamps, but I’ve never tried that method. It seems that could be a bit awkward.
Hello, everyone, Just adding my 2 cents here. Great ideas, I have found that if U wrap your fingertips with the medical tape that only sticks to itself. The stretchy strange looking stuff with holes all over it. It holds the stones very well and it allows U to still feel the stone or wire, and it can be re-used, over and over until it gets too dirty to stick to itself. It also will completely conform to your finger tips. It is also great for picking up small faceted stones and working with beads and is great for holding pearls while hand drilling a larger hole. For women it can also protect your nails while working…Grin. Plus it comes in different colors….. JB
Cool Joe, thanks! (love the ‘fashion’ tip too)
ooo – this is a good one too. My fingers are luvvin’ it!
If you paint the tips of your fingers with rubber cement and let them dry, your fingers will be able to hold smooth items better. When you’re finished, just peel the rubber cement from your fingers.
Cool idea Thomas – thanks!
I just use painters tape for everything. If you get in residue from any sticky media on your cab or wire, Avon Skin So Soft Original Bath Oil will remove it without hurting anything.
I use spray electrical tape,as that is my primary, and it works well
Just wondering – haven’t tried this yet – would the “rubber fingertip grips” that are sold at office supply stores work? That way, you could use one or two or… I’ve used them in the past for sorting paper easily… they grip really well…
Great thought, Aliene – will you let us know how those work?
Thanks!
The best remedy I have ever found for slippery stones, wire, anything is product called “Sit-Tite”. Is is used by equestrians and applied onto leather gloves, reins, the seats of saddles, on the inside of their riding breeches and boots. It gives a non slip surface and is totally harmless to fabrics, metal,…virtually anything. I have used it on stones, beads, metal findings, wire of all types. I just rub it on my fingertips. It isn’t sticky feeling, just gives a non-slip grip. Wipe off with water.
I use those “rubber finger tips” that office workers use for sorting papers. They come in different sizes, so you can get one for your thumb and another for your middle finger… (or whatever finger you need it on.) I also use them on my fingers for holding square wire too. I seem to have a more difficult time holding square wire than round. These you can use anytime you need more grip without residue.
Hi, these are all great tips and I have one more. There is a non drying putty called “museum mount”, that may be a brand name, but you can mold it, tear it, sticks to anything without residue and pulls right off. We use it to stick tags onto artwork and it stays on until you pull it off.
Let me make a comment about ‘Museum Putty’. We use it in the booth, a LOT to keep Texas wind from blowing over busts and such. It doesn’t really like real hot days, but it is invaluable to us.
Hi everyone,
I have found that shelf liner that can be found at the dollar store (has a rubbery feel, sold rolled up and has a waffle-like texture) is very handy for working with slippery items. It is also great to hinder rolling items, rolling up works-in-progress and protecting at the same time. If you cut an appropriately sized square, you can hold the slippery cab or safely place it in a vise. I LOVE that stuff, and it is so cheap!
Dale I do not have a very good grip so after wrapping 1 ring I went to the drugstore and got some rubber fingertips and thin rubber gloves. They seem to solve all those slippery items.
Merry
Good question and answers. I thought it was just me unable to hold securely. I wish I had thought to ask this one and saved a lot of scratching up beautiful stones. Great ideas!
I’ve tried thin rubber gloves from a hardward store and had pretty good luck. I will try some of these suggestions as well to find the one that works best for me. Thanks all for the many good ideas.
haven’t tried it, but what about that poster putty that is used for hanging paper and posters on walls. just an idea. I do use a mouse pad and/or the rubber shelf liner and both work well.