Home / Jewelry Making Patterns / Classic Cocktail Ring
Deborah Kelly's Classic Cocktail Ring, Classic Wire Jewelry. Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire. This classic wire wrap design is often done with square wire.

Classic Cocktail Ring

by Deborah Kelly
  • Category: Classic
  • Technique(s): Wrapping, Weaving
  • Skill Level: Intermediate
This classic wire wrap design is often done with square wire. Using round wire changes up the whole look!

Materials

20 Gauge Round Half Hard Copper Wire
H11-20H
  • Lesson Quantity: 27.50 inches
  • Purchase Quantity: 1.00 5FT
  • Price: $2.08
  • Gold Club Price: $1.56
Add to Bag
22 Gauge Round Half Hard Copper Wire
H11-22H
  • Lesson Quantity: 1.00 feet
  • Purchase Quantity: 1.00 1FT
  • Price: $0.33
  • Gold Club Price: $0.25
Add to Bag
African Turquoise 4mm Round Beads - 8 Inch Strand
A1-733
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $7.37
  • Gold Club Price: $5.53
Out of Stock
4mm Rose 5000 Round Swarovski Crystal Beads - Pack of 12
A13-111
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $3.57
  • Gold Club Price: $2.68
Out of Stock
Add All Items to Cart

Tools

Chain Nose Wire Pliers
G2-508
  • G2-508
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
C.H.P Milano Italian Flush Cutter, 5 1/2 Inches
PLR-487.00
  • PLR-487.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $16.97
  • Gold Club Price: $12.73
Add to Bag
Stainless Steel Ring Mandrel Sizes 1-15
G7-2
  • G7-2
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
Add All Items to Cart
Instructions
Step 1
Take the 5 larger gauge wires and straighten them. Lay the 5 wires side by side. Using the pliers, bend the end of the smaller gauge wire over to form a hook.
The hook should be shorter then the width of the 5 wires next to each other.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 2
Place the hook around the bundle of five wires, about ½ to ¾ of an inch to one side of center on the 5 wire bundle. Use the pliers to crimp the hook around the bundle of wires.
Wrap the smaller gauge wire around the 5 wires that are bundled side by side three times.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 3
End the wrapping wire on the side the wire was started on. Cut it long enough to fold over at least two of the wires bundled together.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 4
Repeat on the other side of the center of the bundled wires about the same distance from the center.
Leave about 1 1/8th inches between wraps for a ring size about a 7 to an 8 ½, leave more room for ring larger sizes and less for smaller size.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 5
Separate the wires of both ends of the ring right after where the band is wrapped.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 6
Wrap the ring band around a ring mandrel 2 sizes smaller then the intended size. Interlace the ends of the wires, bending them slightly around the ring mandrel as they are being interlaced.
Make sure when interlacing the wires to alternate sides so no wires from the same sides are next to each other.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 7
Pull the interlaced wires tight and smooth down onto the ring band, check your wires to make sure none of them crossed. Gently force the ring down the mandrel till you get it to about 2 sizes bigger then you want the ring to be. Keep the ends of the wires tight as it is forced down the mandrel.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 8
Take the remaining small wire and make a hook on the end. The hook needs to be long enough to go at least half way down the center of the interlaced part of the ring. Use pliers to bend the very tip of the hook in some, this makes it so once crimped around the interlaced front of the ring it stays better and is less likely to be felt.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 9
Hook the wire just to one side of center on the interlaced part of the ring. Take pliers and crimp into place. Wrap the wire around twice going toward the center of the interlaced part of the ring. Use your pliers to set each wrap nice and tight.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 10
On the third time the wire comes to the front of the ring, string the beads onto the wire.
Wrap two more times around, setting each wrap as it is done by squeezing the wire lightly with the pliers. Cut off the wrap wire so it will be able to cover about half the interlaced wires on the inside of the ring. Bend the tip of the wire a little so it tucks in then crimped down. Crimp wire down. Feel the inside of the ring for any sharp ends.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 11
Put ring back on mandrel and gently push down till it is 2 ring sizes bigger then desired.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 12
Take the ring off the mandrel and while holding the band of the ring, grasp the wires coming off one side and bend them away from the beads, as shown. It comes out smoothest if you can bend all the wires at the same time, however, that does not always work and it is OK to bend the wires one at a time. Repeat on the other side.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 13
Bend all the wires over the edge of the ring. I do this with my hands if the wire is too stiff pliers may be used. Try not to mar the wire.
Cut the wires to about 3/8 of an inch. Take the pliers and grab just the ends of the wires and start bending them down toward the inside of the ring. This bends the ends of the wire more then the rest so the wires tuck in better and do not scratch the wearer of the ring.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 14
Go from the side of the ring with the pliers and bend the wires the rest of the way and lightly crimp them down against the band on the inside of the ring.
Feel to see if there is any sharp edges, if there are use your pliers to crimp them down a little more.
Repeat on the other side of the ring. Use pliers to make the inside of the ring neat. Feel for any sharp edges.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring
Step 15
Put back on the ring mandrel and make sure it is the right size, if a little small gently push down on the ring till it is the right size.
Deborah Kelly's Classic Cocktail Ring - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, classic cocktail ring

Reviews

Login to post a Review
Login to be the first to review this Pattern!