Erika Pal's Loop Bezel Pendant, Contemporary Wire Jewelry. Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire. The loops on this bezel seem to echo the shape of the stone for a cohesive look.

Loop Bezel Pendant

by Erika Pal
  • Category: Contemporary
  • Technique(s): Making Findings, Making Loops, Weaving
  • Skill Level: Intermediate
The loops on this bezel seem to echo the shape of the stone for a cohesive look. Try it with your favorite cabs.

Materials

20mm round cabochon
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
18 Gauge Round Half Hard Copper Wire
H11-18H
  • Lesson Quantity: 16.00 inches
  • Purchase Quantity: 1.00 5FT
  • Price: $3.38
  • Gold Club Price: $2.53
Add to Bag
22 Gauge Round Half Hard Copper Wire
H11-22H
  • Lesson Quantity: 54.00 inches
  • Purchase Quantity: 1.00 5FT
  • Price: $1.40
  • Gold Club Price: $1.05
Add to Bag
Add All Items to Cart

Tools

4.5 Inch Flat Nose Mini Pliers
G2-88
  • G2-88
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $4.97
  • Gold Club Price: $3.73
Add to Bag
Round Nose Wire Pliers
G2-507
  • G2-507
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
Chain Nose Wire Pliers
G2-508
  • G2-508
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
C.H.P Milano Italian Flush Cutter, 5 1/2 Inches
PLR-487.00
  • PLR-487.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $16.97
  • Gold Club Price: $12.73
Add to Bag
Add All Items to Cart
Instructions
Step 1
For a 20mm big round cabochon cut 2base wires of the 18ga (Imm) wire, with the length of 8inches (20cm), each.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 2
Cut a 24 inches (60cm) long wire of the 22ga (0.6mm) wire. Bend it in half, as shown on this picture.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 3
Hold both base wires together, making sure that the ends of them are aligned. Measure 5cm on the initial end of the base wires, then position the bent center of the weaving wire around them, as shown on this picture.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 4
Take the front end of the weaving wire, bend it completely upwards, wrapping it once around both base wires, as tight as you can.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 5
Now take the other end of the weaving wire,bend it completely upwards, bending it tightly over the base wires.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 6
With the help of the flat nose pliers, pressure the woven part a little bit, to flatten it.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 7
Now cut another weaving wire of the 22ga (0.6mm) wire, with the same length (24 inches /60 cm). Bend it in half.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 8
On the right side of the recently woven wires, position the bent center of this second weaving wire around both base wires.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 9
Repeat exactly the same weaving and flattening steps as we did with the first weaving wire.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 10
We will start to make the braid for the bezel setting. Take both ends of the first weaving wire, bend them to the right side direction behind the ends of the second weaving wire, making a little bit less than I cm tall curved part.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 11
Now bend these weaving wire ends completely downwards, bending them over the base wires, as shown with the arrow.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 12
Wrap these weaving wire ends once around the base wires, as tight as you can.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 13
NOW we have to take both ends of the second weaving wire from the left side, and we have to repeat exactly the same steps again. Bend them to the right side direction behind both ends of the other weaving wire.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 14
Bend these weaving wire ends completely downwards, bending them over the base wires, then wrap them once around the base wires, as tight as you can.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 15
we have to measure the length of the stone circumference, to know how long the braided bezel should be. Wrap a piece of weaving wire once around your stone, as shown here.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 16
Cut the weaving wire, then separate it from the stone.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 17
Straighten it, to get the length of the stone circumference.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 18
Now we have to continue to braid around the base wires, with both weaving wires, until we arrive at the half the length of the stone circumference.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 19
At this point, take the lower base wire, bend it completely downwards, then it slightly to the left side direction, as shown on this picture.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 20
Now bend this base wire upwards, making an approximately I cm big loop with it.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 21
At the point where this lower base wire meets with the upper base wire, hold it tight within the flat nose pliers, then bend it to the right side direction, positioning it to the same place as before
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 22
Continue to braid around both base wires, until the whole length of the braided part is the same as the length of the stone circumference.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 23
Position the braid below the stone, making sure that the central loop is exactly below the bottom center of the stone. Very slowly, start to bend both ends of the braided part around the stone, as shown here.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 24
Continue to bend them until you arrive close to the top of the stone, on both sides.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 25
On the right side, behind the base wires, cut off the extra ends of the weaving wire which is the last one of the braid. Pressure the weaving wire ends with the flat nose pliers, until they are completely closed behind the base wires.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 26
Take both ends of the other weaving wire from the left side, make another braid, as shown here.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 27
Now cut off the extra ends of it, behind the base wires, then pressure the ends with the pliers, until they are completely closed.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 28
On both sides, bend the base wire ends to the sides, exactly in the same way, as shown on this picture.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 29
Continue to bend both sides of the braid, until the two ends of it meet each other above the top of the stone.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 30
Position the wire structure in horizontal. Bend the base wire ends to the sides, crossing them over each other. Take the inner ends of the base wires from both sides, then twist them around each other, until you have a 4 cm long twisted part.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 31
Now bend the ends of the twisted base wires as shown here, making them vertical.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 32
Take the lower base wire (from this point of view), bend it to the right side direction, positioning it below the twisted wires. wrap it once around the lower end of the twisted wires.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 33
Cut off the extra end of the base wire, then pressure it with the flat nose pliers, until it is completely closed.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 34
Repeat exactly the same bending and wrapping steps on the upper side as well.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 35
A little bit below of the center of the twisted wires, hold all wires tight within the round nose pliers, then bend the upper side of them completely backwards, then downwards, as shown here.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 36
Switch to back view. Position your stone inside the wire structure, making sure that the back side of the stone is facing you.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 37
Bend the lower loop upwards, bending it tightly over the back side of the stone. Leave a 1.5 cm long end on both base wires at the top, cut off the extra ends of them.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 38
With the help of the round nose pliers, bend both wire ends upwards, then inwards, making a closed loop with them, as shown on this picture.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 39
Cut a 6 inch (15 cm) long weaving wire of the 22ga (0.6 mm) wire, then bend it in half, as shown here.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 40
Insert the bent weaving wire into the bottom loop, positioning the weaving wire ends upwards, as shown on this picture.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 41
Wrap the weaving wire ends 2 times around these 2 top loops, as tight as you can, then cut off the extra end of them.
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant
Step 42
Switch to front view. Your beautiful pendant is ready.
I hope you enjoyed this project!
Erika Pal's Loop Bezel Pendant - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Weaving, Wire Weaving, Weaving Wire, loop bezel pendant